What type of wood to make a garden gate? - wood garden planters
I want to replace my garden gate with a gate of the same design. The door is a piece of wood in a wood frame. It is 90 cm wide and 110 cm high.
What kind of wood is best for the oppo-plated (, particle board, or whatever)? It is about 2 inches thick to be strong enough and remove the hinge screws and accessories.
Friday, January 15, 2010
Wood Garden Planters What Type Of Wood To Make A Garden Gate?
4 comments:
You need to idle the pressure treated wood has a local timber merchant in a position to sell this
In fact, you have several options, but if you want to look - you need special order marine plywood. Your wallet - Connect because they do not. This is the material used for fencing. The last time I bought a sheet (I have a couple of planks of the basketball) was $ 115 for the road, and it was in 1983!
There is nothing wrong with the door aesthetically different than the rest of the fence. You can do this from a simple pin - get the picture (in full) per year!
You could Trex, pressure-treated wood, redwood, cedar and PVC.
Try to walk into Home Depot, Lowes, or a full-service mill. Believe me, I would draw you in the right direction!
Good luck!
A Tom
Mr Construction Project
Albion, Michigan
Pressure-treated wood
its better to go to a fence contractor ... Inventory and tanilised
Post a Comment